Configure dispatchers

You can configure a number of dispatchers to handle different ways of sending messages. SmartPost is delivered with 6 default dispatchers.

You can modify the default dispatchers to match your organization's needs or you can create new dispatchers.

You can create dispatchers of the following types:

NgDP - The message is to the recipient's digital mailbox.
e-Boks - The message is sent to the recipient's digital mailbox in e-Boks.
Strålfors - The message is sent to Strålfors that handles the printing, enveloping, and handover to PostNord.
OneTooX – The message is sent to KMD Print Center that handles the printing, enveloping, and handover to PostNord.
Local print - The WorkZone user receives a smarttask that includes the SmartPost messages in PDF format. The user handles printing, enveloping, and sending of the messages manually.
Exchange - The message is sent to the recipient's email address.

Configure dispatchers

You create and configure dispatchers in WorkZone Configurator.

In WorkZone Configurator, click Process
Click Process dispatchers.
Point to the dispatcher you want to use, for example NgDP, and click Edit. Change the values so that they match your organization, such as the name and description of the dispatcher, start and end date, and access rights. See Process Dispatchers in the WorkZone ConfiguratorAdministrator Guide for a description of the dispatcher settings.

- Or -

Click to create a new dispatcher. In the Select dispatcher dialog, select the type of dispatcher you want to create.

Click Save to save the changes you made to an existing dispatcher, or Create to create a new dispatcher.

The next step is to customize the default dispatcher parameters according to your organization, or if you created a new dispatcher, define the parameters from the start.

Edit dispatcher parameters

Point to , and click Edit dispatcher parameters.
Fill in the values for the parameters. The parameters are specific to the dispatcher type.

NgDP parameters

Name	Default	Description
URL	https://api.digitalpost.dk/apis/v1	The URL for the NgDP service. Enter one of the URLs depending on whether the configuration is made for test or production. Test system: `https://api.test.digitalpost.dk/apis/v1` Production system: `https://api.digitalpost.dk/apis/v1`
CertificateThumbPrint		The thumbprint that identifies the NgDP certificate. The certificate must be a FOCES 3 or VOCES 3 certificate with a correct CVR number.
MaxDocumentSize	7864320	The maximum size of an NgDP MeMo message in bytes. Messages that exceed this limit will not be sent. The default value is 7864320 bytes. Refer to Digitaliser.dk for recommendations on document size.
SenderName		The name of the organization that sends the message.
SenderCvr		CVR number of the organization that is sending messages.
SystemGuid		The GUID of the NgDP Sender/Receiver system. See Create a sender/receiver system.
ContactPointGuid		The GUID of your organization's NgDP reply point (mailbox for replies). You can see the GUID in the ID field on the Kontraktstruktur page in the NgDP portal. To receive messages, it is required to set up a contact hierarchy in the NgDP portal. See Configure contact points.
AuthorizationHeader		The API-key of the NgDP Sender/Receiver system. The AuthorizationHeader is generated by the Administrativ Adgang portal when the sender/receiver system is defined.
Protocol		The NgDP protocol that is used by the Sender/Receiver system that is specified in the SystemGuid parameter. Set to REST_PULL or REST_PUSH depending on which protocol you use. By default, it set to REST_PULL.
RemotePushServiceEndPoint		The endpoint of the remote push service. It is only required if you use REST_PUSH protocol. It points to a centralized push service. It must be the same push server that is configured to receive memos and receipts in the Administrativ Adgang portal.
UseCompression		Turn on this setting if you want to compress the message before sending it. By default this parameter is turned on.
ReceiveMemoTransformation		Enter the document ID of an XSLT transformation that will be applied to received MeMo messages before they are processed by WorkZone. The XSLT transformation is used to repair invalid messages that WorkZone cannot receive. The XSLT transformation must have the document state Locked or Archived. Note: This parameter is only relevant if errors occur when saving incoming messages in WorkZone. Please create a WorkZone support case and include the process workflow log from the service process that received the message.
DebugOutput		Turn on this setting to enable expanded logging. If turned on, all requests to the NgDP service will be written to the workflow log. You should only turn on this setting if you are investigating errors from Digitalieringsstyrelsen's NgDP service. By default, the setting is turned off. See also: Logging communication with the NgDP service.

About the NgDP dispatcher

The NgDP dispatcher supports sending and receiving messages using the PULL model. It is also possible to use the NgDP dispatcher with the PUSH model, but it is not recommended because both the infrastructure and the configuration is more complex than for the PUSH model.

Sending SmartPost messages using NgDP

When using NgDP to send messages, SmartPost converts outgoing messages to the MeMo format used by Digital Post before sending the messages.

The NgDP flow that is used to send messages from SmartPost is illustrated below:

For more information about MeMO, please refer to MeMo on the Agency for Digital Government's website.

Receiving messages in SmartPost using NgDP

When receiving messages from Digital Post, SmartPost converts the incoming MeMo messages to XML that SmartPost can retrieve.

The NgDP flow that is used to retrieve messages from Digital Post is illustrated below:

E-Boks parameters

Name	Default	Description
SenderSystemId		The sender system identifier, which is retrieved during the configuration of the system in the e-Boks administration portal.
ReceiverSystemId		The receiver system identifier, which is retrieved during the configuration of the system in the e-Boks administration portal.
URL	https://rest.e-boks.dk/v1.svc	The URL for the e-Boks service. Enter one of the URLs depending on whether the configuration is made for test or production. Test system: `https://demo-rest.e-boks.dk/v1.svc` Production system: `https://rest.e-boks.dk/v1.svc`
CertificateThumbPrint		The thumbprint that identifies the e-Boks certificate.
MaxDocumentSize	78643200	The maximum size of an e-Boks message in bytes. Messages that exceed this limit will not be sent to e-Boks. The default value is 78643200 (75 MB). Note: e-Boks determines the maximum size. If e-Boks changes the size, you can change this configuration accordingly but due to encoding you must reduce the size set by e-Boks by 25%. For example, if the size set by e-Boks is 99,5 MB, you must set the MaxEBoksDocumentSize parameter to 99,5 MB * 75% = 75 MB.
ResponseThreshold	1800	Defines the maximum time that SmartPost expects that it takes e-Boks to process a message. Specify the threshold in seconds. The default value is 1800 seconds (30 minutes). Note: The default value is most often used. In situations where the communication with e-Boks is slow, you can increase it.
SenderName		The name of the organization that sends the message.
ReceiverUrl	https://<host-or-database>/EboksPushService/api/MeddelelseV2	The URL for receiving messages using Digital Post 2. If the parameter is left empty, the default URL in the Url parameter is used.
DP2Url	https://demo-api.e-boks.com/oio/rest/srv.svc/2	The URL for receiving messages using Digital Post 2. If the parameter is left empty, the default URL in the Url parameter is used.
NgDpGuid		The GUID of the NgDP combined sender/receiver system. You can see the GUID in the NgDP Portal. Note: This parameter is only relevant if you use the NgDP integration.
SenderCvr		CVR number of the organization that is sending messages. Note: This parameter is only relevant if you use the NgDP integration.
NgDpContactPointGuid		The GUID of your organization's NgDP reply point (mailbox for replies). You can see the GUID in the ID field on the Kontraktstruktur page in the NgDP portal. To receive messages, it is required to set up a contact hierarchy in the NgDP portal. Note: This parameter is only relevant if you use the NgDP integration.
NgDpAuthorizationHeader		The AuthorizationHeader is generated by the Administrativ Adgang portal when the sender/receiver system is defined. Note: This parameter is only relevant if you use the NgDP integration.
NgDpProtocol		Set to REST_PULL or REST_PUSH depending on which protocol you use. Note: This parameter is only relevant if you use the NgDP integration.
RemotePushServiceEndPoint		Point to point to a centralized push service. It must be the same push server that is configured to receive memos and receipts in the Administrativ Adgang portal. Note: This parameter is only relevant if you use the NgDP integration and set up the dispatcher to use the PUSH model.
ReceiptWorker		Points to the e-Boks Push Service thread that fetches receipts from NgDP. The parameter ensures that only one thread fetches the receipts, if you have multiple e-Boks push services running. The parameter is automatically set by the e-Boks push service, and it is only shown if the service is running. If your organization removes or replaces a server with a running e-Boks push service, you need to clear the value of this parameter, and then recycle the EBoksPushAppPool app pool to update it.

For more information about configuring an e-Boks dispatcher to NgDP, See Configure SmartPost to use NgDP on the 2023.3 Documentation Portal.

Strålfors parameters

Name	Default	Description
SenderSystemID		The system identifier, which is provided when configuring the system in the Strålfors administration portal. Either Strålfors or the person, who configures the portal for Strålfors, must provide this identifier.
Url	https://prodprint. sconnect.dk/ fjernprint/1.0.0	The URL for the Strålfors Connect service. Depending on whether the configuration is made for test or production, enter one of the two URLs. Test: https://testprint.sconnect.dk/fjernprint/1.0.0 Production: https://prodprint.sconnect.dk/fjernprint/1.0.0
CertificateThumbprint		Enter the thumbprint that identifies the Strålfors certificate.
ResponseThreshold	-1	Defines the maximum time that SmartPost expects that it takes to send a message to Strålfors. This value is used to calculate the deadline (supervised by the deadline monitor). The value is an integer, which (if positive) specifies the threshold in seconds. Normally, the default setting is used. If the communication with Strålfors is very slow, you can specify a high value.
MaxDocumentSize	375000000	The maximum number of bytes that a message for remote print can contain. Messages that exceed this limit will not be sent for remote print. The default value is 375000000 bytes (375 MB). Note: Unless otherwise communicated, it is recommended to keep the values provided at the installation.
SenderName	KMD	The name of the company that is used in the postal address. The postal address is used when Strålfors produces the letters. The company name is taken from the address on which the authority will receive letters and returned mail.

OneTooX parameters

Name	Default	Description
URL	https://privat.doc2mail.dk/ delivery/FileUploader.asmx	The URL for the OneTooX service. Test: https://test.doc2mail.dk/delivery/FileUploader.asmx Production: https://private.doc2mail.dk/delivery/FileUploader.asmx
SystemKey		Enter the system key in clear text. Copy and paste the content of the system key file (PKE file) that you have received from KMD Printcenter in to this field. If you work with WorkZone Configurator in Microsoft Internet Explorer and encounter problems with the system key not being pasted correctly, please open WorkZone Configurator in Google Chrome and try to paste the key again.
ResponseThreshold	600	The maximum time in seconds that a communication channel with OneTooX is open. Default is 600 seconds (10 minutes).
MaxDocumentSize	1000000	The maximum number of bytes that OneTooX will send. Numbers higher than 99600000 will be truncated.
SenderName		The name of the company.

Local print parameters

Name	Default	Description
LocalPrintResponseThreshold	1800	Defines the maximum time that SmartPost expects that it takes for local print to process a message. This value is used to calculate the deadline (supervised by the deadline monitor). Specify the threshold in number of seconds. The default value is 1800 seconds (30 minutes). The default value is most often used.
SenderName		The name of the organization that sends the message.

Name

Default

Description

LocalPrintResponseThreshold

1800

Defines the maximum time that SmartPost expects that it takes for local print to process a message. This value is used to calculate the deadline (supervised by the deadline monitor). Specify the threshold in number of seconds. The default value is 1800 seconds (30 minutes).

The default value is most often used.

SenderName

The name of the organization that sends the message.

Exchange parameters

The configuration of the Exchange dispatcher parameters depend on your Exchange configuration. See Configuration of Exchange parameters.

Name	Description
ExchangeMailbox	The email address of the mailbox that emails will be sent from. It is recommended to configure a No-Reply mailbox because recipients cannot reply to emails that are sent with the Exchange dispatcher.
ExchangeUserPassword	The password to the Exchange user's email address that is specified for the ExchangeMailbox parameter and used in the Resource Owner Password Credentials (ROPC) flow. It is recommended to choose between this parameter and the ExchangeOauthClientSecret parameter.
ExchangeServerUri	The URL endpoint for the Exchange amsx service. For example, `https://dc1.lmdom.ocal/EWS/Exchange.asmx`. If this parameter is not specified, autodiscover will be used to resolve the endpoint.
ExchangeUserName	Name of the user account used for accessing the Exchange service. If the parameter is left empty, the mailbox from the ExchangeMailbox parameter will be used.
ExchangeUserDomain	The domain for the Exchange user.
ExchangeOauthClientID	The OAuth2 Client ID that is used to access the mailbox in Exchange Online.
ExchangeOauthTenantID	The OAuth2 Tenant ID used to access the mailbox in Exchange Online.
ExchangeOauthClientSecret	The OAuth2 Client secret used to access the mailbox in Exchange Online. If set, the client credentials flow is used. It is recommended to choose between setting this parameter and the ExchangeUserPassword parameter.
EmbeddedPrimaryDocument	Turn on this setting you want to show an image of the first page of the main document in the email body.
StoreMessages	Turn on this setting if you want to save the sent email in the Sent folder of the mailbox that is specified in the ExhangeMailbox parameter. Note that the SmartPost process will wait for the emails to be moved to the Sent folder before reporting that the dispatch has been successful.

Configuration of Exchange parameters

Depending on your Exchange configuration, fill in the following parameters in the Exchange dispatcher.

See Command line configuration.